Before you start
Before using the AXIS Internet Dynamic DNS Service, you must install your Axis product on your local network:
Connect your Axis product to your local network and connect power to the product. Wait for the Status indicator on the front of the camera to show a steady green.
Now press the reset button on the back of the product once. The Status indicator will blink green while the product connects to the AXIS Internet Dynamic DNS Service.
Wait for the Status indicator to show a steady green. If the Status indicator flashes red for 10 seconds, you must use an alternative installation procedure to set the IP address.
From a PC connected to the Internet, you have 60 minutes to visit www.axiscam.net to access the link to the Axis product.
Once you're at the www.axiscam.net site, enter the serial number of your product and click the Proceed button. Then follow the online instructions.
ALTERNATIVE INSTALLATION PROCEDURE
If registration using the AXIS Internet Dynamic DNS Service fails, the product can be installed using one of these methods:
Please see the relevant user documentation for detailed instructions for your product.